AEG BE4003001 Manuel de l'utilisateur - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG BE4003001. AEG BE4003001 32 pages. Aeg be2003021 oven
Également pour AEG BE4003001 : Manuel de l'utilisateur (24 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur (32 pages), Manuel de l'utilisateur (32 pages)

Removing and cleaning the door glass panels

1. Remove the oven door.

2. Hold the door t (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

3. Pull the door t to the front to remove it.

4. Hold the door glass panels on their top

edge one by one and pull them up out of

the guide

5. Clean the door glass panels.

To install panels follow the procedure in re-

verse. Install the smaller panel first, then the

larger.

WHAT TO DO IF...

WARNING!

Refer to "Safety information" chapter.

Problem

The oven does not heat up

The oven lamp does not oper-

ate

Possible cause

The appliance is switched off

The clock is not set

The necessary settings are not

set

The automatic cut-out is

switched on

The fuse is released

The oven lamp is defective

What to do if...

Solution

Switch on the appliance

Set the clock. Refer to "Setting

the clock"

Make sure, the settings are cor-

rect

Refer to „Automatic cut-out"

Make sure, if the fuse is the

cause for the malfunction. If

the fuse releases again and

again, refer to an authorized

electrician

Replace the oven lamp.