A+V Link Technologies PowerHDLink AVM-6985H-SYS-A3 Manuel d'installation rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} A+V Link Technologies PowerHDLink AVM-6985H-SYS-A3. A+V Link Technologies PowerHDLink AVM-6985H-SYS-A3 8 pages.

Imprimer la page

A+V Link Technologies

Step 6: Turn on power switches

Turn on the Power Switches on the rear panels of both Rx and Tx.

Wait for about 10 seconds.

A red Power Indicator light will illuminate on the front panel of both

the Transmitter and Receiver. The Source LED indicator on the Tx

will show which of the available input connectors is currently in use

Source LED indicators on front panel:

HDMI connector 1

HDMI connector 2

HDMI connector 3

AV1

CVBS/S-Video

AV2

YPbPr connectors

In our example we connected the Blu-Ray player to HDMI #3,

so the Source LED indicator "HDMI 3" should illuminate.

4 Video Source Remote Control

With the PowerHDLink system, you can control your video player from the remote location (i.e. where

Rx is located), using the Video Player's remote controller (must be Infrared Remote Controller). The

Rx is fitted with an IR sensor that receives the signals and sends them over the power lines to the Tx,

where the Tx re-emits the same IR signals to the video player.

PowerHDLink Quick Setup Guide

Source LED

indicators

Version 2.2

Power LED