Alinea 200SS Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alinea 200SS. Alinea 200SS 14 pages. Gsm callshop desktop phone

Imprimer la page

Change user password

a)
Enter menu "9: USER PASSWORD"
7:SETTINGS i8:IMEI - VERSION 9:USER PASSWORD j
b)
Input an 8-digit user's password (the initial user password is sets up as
64139025). Press "OK". If the password is error, LCD will display "PASSWORD
ERROR" and returns to the up-level menu. If the password is correct, the LCD
shows "CHANGE PASSWORD"
ENTER PASSWORD ********
c)
Press "OK" after input your new password, the LCD shows "REENTER
PASSWORD", input the new password again and press "OK". If the twice input
password is the same, the setting will be successful, the LCD display "CHANGED",
otherwise the LCD will display "FAILED" and return to up-level menu.
CHANGE PASSWORD ********
Note: User's password is used to erase call lists, erase call statistic and
Inquire/Reset Accumulated charges.
Lock keyboard for charging from the customers (optional
function)
When a charge call is end, the keyboard will be locked and the phone will ring to
indicate the owner to charge. The owner can press "Reset" to halt the ring and
unlock the keyboard.

Menu-lock

Enable menu-lock at fist before locking or unlocking menu. If it is not enable, it is
no use to press"F3" in standby status. When menu is locked, user can make calls or
answer calls, but can't enter menu.
a)
Enable menu-lock
i)
In standby status, press "Menu" to enter main menu, the press "0" to enter
"0: MENU-LOCK ENABLE". The LCD will display as following:
MENU-LOCK ENABLE 1:ON 0:OFF 0
ii)Press "1" and then press "OK", Menu-lock will be enabled. Press "Back" to cancel
the operation and return to standby status.
b)
Lock menu or unlock menu.
i) When menu-lock is enabled, press "F3" in standby status.If menu is unlock, the
LCD will display as follows:
LOCK MENU?YES:1 NO:0
If the menu is locked, the LCD will display as follows:
UNLOCK MENU YES:1 NO:0
ii) Press "0", the phone will return to standby status. Press "1", the following will be
displayed.
ENTER PASSWORD
iii)Enter an 8-digit user's password and then press "OK". If the password is not
correct, the LCD will display "PASSWORD ERROR" and then the phone will return to
AlineA Ltd.
Page 12 of 14
200SS GSM CallShop Desktop Phone
Users Manual