Alinx AN9134 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alinx AN9134. Alinx AN9134 13 pages. Hdmi display module

is also added in the programs.

i2c_config.v

This module is used to registers the SiI9134 chip by calling the

I2C communication module ， the configured register address and

value are defined in the lut_9134.v file. The specific registers

meaning, please refer to the instruction manual of SiI9134 chip.

reset_power_on.v

This modules is used to generate a software reset to initialize others

modules after power-on.

Part 4 Hardware connection and Testing

The hardware connection between the AN9134 module and FPGA

development are easy. The 40-pin female headers of module plug into the

expansion board of FPGA development kit, and then connect the HDMI

connector to the monitor. The figure 4-1 is the expansion IOs J1 of ALINX

Series FPGA development kit AX301 and the AN9134 HDMI module

hardware connection as below: (if connected to the expansion IOs J2, need

to re-assign the pins)

10 / 13

HDMI Display Module AN9134 User manual