Garmin D2 AIRX10 Manuel du propriétaire - Page 42

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin D2 AIRX10. Garmin D2 AIRX10 48 pages.

Imprimer la page
Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after
exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to
these substances can damage the case.
Keep the leather band clean and dry. Avoid swimming
or showering with the leather band. Exposure to water
or sweat can damage or discolor the leather band. Use
silicone bands as an alternative.
Do not store the device where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage.

Cleaning the Watch

Some users may experience skin irritation after prolonged
use of the watch, especially if the user has sensitive skin
or allergies. If you notice any skin irritation, remove the
watch and give your skin time to heal. To help prevent skin
irritation, ensure the watch is clean and dry, and do not
overtighten the watch on your wrist.
Even small amounts of sweat or moisture can cause
corrosion of the electrical contacts when connected to
a charger. Corrosion can prevent charging and data
transfer.
TIP: For more information, go to
/fitandcare.
1 Rinse with water, or use a damp lint-free cloth.
2 Allow the watch to dry completely.

Changing the Bands

The watch is compatible with 20 mm wide, standard,
quick-release bands.
1 Slide the quick-release pin on the spring bar to remove
the band.
2 Insert one side of the spring bar for the new band into
the watch.
3 Slide the quick-release pin, and align the spring bar
with the opposite side of the watch.
4 Repeat steps 1 through 3 to change the other band.
36
CAUTION
NOTICE
www.garmin.com

Troubleshooting

Is my phone compatible with my watch?

The D2 Air X10 watch is compatible with phones using
Bluetooth technology.
Go to
garmin.com/pilotapp
information.
Go to
garmin.com/voicefunctionality
functionality compatibility information.

My phone will not connect to the watch

If your phone will not connect to the watch, you can try
these tips.
• Turn off your phone and your watch, and turn them
back on again.
• Enable Bluetooth technology on your phone.
• Update the Garmin Connect app to the latest version.
• Remove your watch from the Garmin Connect app and
the Bluetooth settings on your phone to retry the pairing
process.
• If you bought a new phone, remove your watch from the
Garmin Connect app on the phone you intend to stop
using.
• Bring your phone within 10 m (33 ft.) of the watch.
• On your phone, open the Garmin Connect app, select
or
, and select Garmin Devices > Add Device to
enter pairing mode.
• From the watch face, hold
Phone > Pair Phone.

My headphones will not connect to the watch

If your Bluetooth headphones were previously connected
to your phone, they may connect to your phone
automatically instead of connecting to your watch. You
can try these tips.
• Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for more
information.
• Stay 10 m (33 ft.) away from your phone while
connecting your headphones to your watch.
• Pair your headphones with your watch
Bluetooth Headphones,
My music cuts out or my headphones won't stay
connected
When using a D2 Air X10 watch connected to Bluetooth
headphones, the signal is strongest when there is a direct
line of sight between the watch and the antenna on the
headphones.
• If the signal passes through your body, you may
experience signal loss or your headphones may
become disconnected.
• If you wear your D2 Air X10 watch on your left wrist, you
should make sure the headphone's Bluetooth antenna
is on your left ear.
for Bluetooth compatibility
for voice
, and select Connectivity >
(Connecting
page 9).
Troubleshooting