Garmin Fenix 5s Manuel du propriétaire - Page 35
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin Fenix 5s. Garmin Fenix 5s 48 pages.
Également pour Garmin Fenix 5s : Manuel du propriétaire (27 pages)
Imprimer la page
3
To start a breathing activity, select DOWN >
duration for the breathing activity in minutes.
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut
menu options in the controls menu
page
1).
1
Hold UP.
2
Select Settings > Controls.
3
Select a shortcut to customize.
4
Select an option:
• Select Reorder to change the location of the shortcut in
the controls menu.
• Select Remove to remove the shortcut from the controls
menu.
5
If necessary, select Add New to add an additional shortcut to
the controls menu.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must
install a watch face from the Connect IQ store
Features, page
10).
You can customize the watch face information and appearance,
or activate an installed Connect IQ watch face.
1
From the watch face, hold UP.
2
Select Watch Face.
3
Select UP or DOWN to preview the watch face options.
4
Select Add New to scroll through additional pre-loaded watch
faces.
5
Select
> Apply to activate a pre-loaded watch face or an
installed Connect IQ watch face.
6
If using a pre-loaded watch face, select
7
Select an option:
• To change the style of the numbers for the analog watch
face, select Dial.
• To change the style of the hands for the analog watch
face, select Hands.
• To add the plane's tail number to the aviation-specific
analog watch face, select Tail Number.
• To change the style of the numbers for the digital watch
face, select Layout
• To change the style of the seconds for the digital watch
face, select Seconds.
• To change the data that appears on the watch face, select
Data.
• To add the universal coordinated time or the plane's tail
number to the aviation-specific digital watch face, select
UTC/Tail Number.
• To add or change an accent color for the watch face,
select Accent Color.
• To change the background color, select Bkgd. Color.
• To save the changes, select Done.
Sensors Settings
Compass Settings
Hold UP, and select Settings > Sensors & Accessories >
Compass.
Customizing Your Device
, and enter a
(Viewing the Controls Menu,
(Connect IQ
> Customize.
Calibrate: Allows you to manually calibrate the compass sensor
(Calibrating the Compass Manually, page
Display: Sets the directional heading on the compass to letters,
degrees, or milli-radians.
North Ref.: Sets the north reference of the compass
North Reference, page
29).
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
Calibrating the Compass Manually
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1
Hold UP.
2
Select Settings > Sensors & Accessories > Compass >
Calibrate > Start.
3
Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion until a
message appears.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1
Hold UP.
2
Select Settings > Sensors & Accessories > Compass >
North Ref..
3
Select an option:
• To set geographic north as the heading reference, select
True.
• To set the magnetic declination for your location
automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select
Grid.
• To set the magnetic variation value manually, select User,
enter the magnetic variance, and select Done.
Altimeter Settings
Hold UP, and select Settings > Sensors & Accessories >
Altimeter.
Barometer: Allows you to set the barometric pressure manually,
or select a value from the nearest METAR station through the
Garmin Connect Mobile app.
Altitude Alert: Sets an alarm to vibrate when you reach a
specified altitude.
O2 Alert: Sets an alarm to vibrate when you reach a low-oxygen
altitude.
Sync to Elevation: Allows you to synchronize the device to your
current elevation manually.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometric altimeter if
you know the correct elevation.
1
From the altimeter widget, hold UP.
2
Select Options.
3
Select an option:
• To enter the current elevation, select Calibrate > Yes.
29).
(Setting the
NOTICE
29