Garmin FORERUNNER 245 Manuel du propriétaire - Page 29
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin FORERUNNER 245. Garmin FORERUNNER 245 40 pages.
Imprimer la page
Alerts: Allows you to set hourly alerts, as well as sunrise and
sunset alerts that sound a specific number of minutes or
hours before the actual sunrise or sunset occurs.
Sync With GPS: Allows you to manually sync the time with GPS
when you change time zones, and to update for daylight
saving time.
Changing the Backlight Settings
1
From the watch face, hold UP.
2
Select Settings > System > Backlight.
3
Select During Activity or Not During Activity.
4
Select an option:
• Select Keys and Alerts to turn on the backlight for key
presses and alerts.
• Select Gesture to turn on the backlight by raising and
turning your arm to look at your wrist.
• Select Timeout to set the length of time before the
backlight turns off.
Changing the Units of Measure
You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1
From the watch face. hold UP.
2
Select Settings > System > Units.
3
Select a measurement type.
4
Select a unit of measure.
Extended Display Mode
You can use Extended Display mode to display data screens
from your Forerunner device on a compatible Edge device
during a ride or triathlon. See your Edge owner's manual for
more information.
Clock
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1
From the watch face, hold UP.
2
Select Settings > System > Time > Sync With GPS.
3
Wait while the device locates satellites
Signals, page
28).
Setting the Time Manually
1
From the watch face, hold UP.
2
Select Settings > System > Time > Set Time > Manual.
3
Select Time, and enter the time of day.
Setting an Alarm
You can set up to ten separate alarms. You can set each alarm
to sound once or to repeat regularly.
1
From the watch face, hold UP.
2
Select Alarm Clock > Add Alarm.
3
Select Time, and enter the alarm time.
4
Select Repeat, and select when the alarm should repeat
(optional).
5
Select Sounds, and select a type of notification (optional).
6
Select Backlight > On to turn on the backlight with the alarm.
7
Select Label, and select a description for the alarm
(optional).
Customizing Your Device
Deleting an Alarm
1
2
3
4
Starting the Countdown Timer
1
2
3
4
5
6
Using the Stopwatch
1
2
3
4
5
6
7
VIRB Remote
The VIRB remote function allows you to control your VIRB
(Acquiring Satellite
action camera using your device. Go to
to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also set the
VIRB widget to be shown in the widget loop
Widget Loop, page
1
2
3
4
5
From the watch face, hold UP.
Select Alarm Clock.
Select an alarm.
Select Delete.
From any screen, hold LIGHT.
Select Timer.
NOTE: You may need to add this item to the controls menu
(Customizing the Controls Menu, page
Enter the time.
If necessary, select Restart > On to automatically restart the
timer after it expires.
If necessary, select Sounds, and select a type of notification.
Select Start Timer.
From any screen, hold LIGHT.
Select Stopwatch.
NOTE: You may need to add this item to the controls menu
(Customizing the Controls Menu, page
Select START to start the timer.
Select BACK to restart the lap timer
The total stopwatch time
Select START to stop both timers.
Select .
Save the recorded time as an activity in your history
(optional).
22).
Turn on your VIRB camera.
On your Forerunner device, select UP or DOWN from the
watch face to view the VIRB widget.
Wait while the device connects to your VIRB camera.
Select START.
Select an option:
• To record video, select Start Recording.
The video counter appears on the Forerunner screen.
• To take a photo while recording video, select DOWN.
• To stop recording video, select STOP.
• To take a photo, select Take Photo.
• To change video and photo settings, select Settings.
22).
22).
.
continues running.
www.garmin.com/VIRB
(Customizing the
25