A-Collection SE 5332066 Instructions d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} A-Collection SE 5332066. A-Collection SE 5332066 16 pages. Wireless doorbell incl. push button

Imprimer la page

Installation instructions

Important: test the range of the doorbell first before installing it.

For the receiver: In order for the receiver to work, simply plug it into a standard wall socket in

the room.

Transmitter: the transmitter can be installed in 2 different ways.

Installation method 1: Double-sided adhesive tape (recommended installation method)

1. Once you have determined the mounting position, clean the flat surface where the

transmitter is to be mounted.

2. Tear off one side of the double-sided adhesive tape and attach it to the underside of the

transmitter. Tear off the other side, place the transmitter on the wall and press for 10

seconds.

Installation method 2: Screws/plugs (optional installation method)

Prepare a drill, Phillips screwdriver and slotted screwdriver before installation.

1. Mark out the two mounting holes.

2. Drill two holes on the markings and insert the 2 expansion screws supplied with the

package.

3. Screw on the transmitter's bracket or base.

Troubleshooting

1. The receiver does not sound

• Check the doorbell battery and replace it if necessary.

• The plug on the receiver is loose.

• The receiver may be out of range of the doorbell.

• The receiver may not have been paired with the doorbell.

• Make sure the volume control is not at the lowest level.

2. Limited range

• Metal structures, as well as door frames made of uPVC reduce the range of the product.

Avoid installing the transmitter or receiver close to metal structures.

• Other equipment may cause radio interference that affects your doorbell.

• Walls and ceilings reduce range.

• Low batteries reduce the range. Change the battery every 12 to 18 months.

Specifications

Operating voltage for receivers inserted in a wall socket:

Operating voltage for a battery-powered receiver:

Wireless range:

Audible area:

Selectable ringtones:

Volume range:

Receiver's power consumption:

Transmitter's power consumption:

Doorbell battery:

Expandable (yes or no):

Operating frequency:

Operating temperature:

AC 85 ~ 265 V

3 AAA batteries (sold separately)

Over 150 metres in open air

300 feet

0~110 dB, 5 levels

< 0.5 W

< 10 mW

CR2032 battery (included)

Yes

433.92 MHz ± 280KHz

-30°C ~ 70°C

5 (16)