Brother 884-B31 Manuels d'utilisation - Page 29

Parcourez en ligne ou téléchargez le pdf Manuels d'utilisation pour {nom_de_la_catégorie} Brother 884-B31. Brother 884-B31 36 pages. Cover stitch machine / top cover stitch machine

Imprimer la page

Sewing a cover stitch

1. Determine how much of the fabric will be folded

up.

2. Fold up the fabric the desired amount, and then

iron it in place.

3. Use a ruler to measure, and then use a

fabric marker to mark the top of the fabric to

sew where the edge of the folded fabric is

positioned.

4. Place the bottom of the presser foot onto the

top of fabric, and then check that the drawn

mark is just barely to the right of the left needle.

5. Sew exactly on the mark.

6. After sewing is finished, refer to "Removing the

fabric from the machine (Cover stitch model)"

on page 24 for details on taking care of the

threads.

1 Fabric (surface)

2 Mark drawn with fabric marker

3 Left needle (just barely on the left side of the mark)

4 Right needle

5 Fabric

6 Needle

Sewing tubular garments

(for example, cuffs)

Without free-arm sewing

1. Raise the presser foot, insert the fabric as

shown in the illustration, lower the presser foot,

and then begin sewing.

2. Finish sewing by overlapping about 4 cm (1-1/2

inch) of the beginning and end of the stitching.

NOTE:

When sewing tubular garments, overlapping

the beginning and end of the stitching by about

4 cm (1-1/2 inch) will prevent the seam from

tearing.

3. Remove the fabric as explained in "Removing

the fabric from the machine (Cover stitch model)"

and "Removing the fabric from the machine (Top

cover stitch model)" on pages 24 and 25.