Garmin NavComm SL30 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Garmin NavComm SL30. Garmin NavComm SL30 48 pages. Vhf transceiver
Également pour Garmin NavComm SL30 : Manuel de référence rapide (2 pages), Installation (2 pages)

Imprimer la page

Getting Started

System Mode

In the System mode you can view software versions, setup

the Nav and Comm functions, and record VOR test

information. See the Advanced Operations section for

more details.

OBS Mode

Press the

lights, then you may use the

adjust the Omni Bearing Selector.

Recalling Frequencies

In the Comm or Nav modes, press

the available frequency lists of each mode. Turn the

LARGE

1. Press

2. Press

3. Turn the

4. Turn the

in the selected type.

5. Press

position or press

channel into the Active position. You can press

again to cancel selection.

Emergency Channel

The standard emergency channel (121.50 MHz) is stored

in the Comm memory of the SL30.

1. Press

SEL

one position counter-clockwise will reach it fastest.

2. Press the

channel the Active channel.

3. Listen, or key the Mic to send your message.

OBS

button. If the annunciator above the button

SMALL

and

knobs to view the available channels.

COM

NAV

to go to the desired mode.

SEL

to go to the frequency database.

LARGE

knob to review the type of frequency.

SMALL

knob to display the available channels

ENT

to put the displayed channel into the Standby

FLIP/FLOP

COM

, if you aren't in Comm mode already. Press

LARGE

. Turn the

119.10 s124.55

FLIP/FLOP

LARGE

and

SEL

to put the displayed

knob to the Emergency channel,

emrgncy 121.50

button to make the Emergency

SMALL

knobs to

to gain access to

SEL