Garmin nuviCam Manuel du propriétaire - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin nuviCam. Garmin nuviCam 28 pages.

Imprimer la page

• AC adapter (optional accessory)

Charging the Device

NOTE: This Class III product shall be powered by an LPS power

supply.

You can charge the battery in the device using any of these

methods.

• Connect the device to the vehicle power cable.

• Connect the device to a computer using a USB cable.

The device may charge slowly when connected to a

computer. Some portable computers may not charge the

device.

• Connect the device to an optional power adapter accessory,

such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter

suitable for home or office use from a Garmin dealer or

www.garmin.com.

Changing the Fuse in the Vehicle Power Cable

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it 90 degrees clockwise to

lock it back into the vehicle power cable

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

Grip the device by the top and bottom.

Pull the bottom edge of the device toward you until it releases

from the magnet.

Pulling the device straight toward you may cause the mount

to release from the suction cup.

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Purchasing Additional Maps

Go to your device product page at (www.garmin.com).

Click the Maps tab.

Follow the on-screen instructions.

Troubleshooting

NOTICE

90 degrees counter clockwise to

, and the fuse

Purchasing Accessories

Go to http://buy.garmin.com.

The suction cup will not stay on my

windshield

Clean the suction cup and windshield with rubbing alcohol.

Dry with a clean, dry cloth.

Mount the suction cup

Device in Your

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable

Fuse in the Vehicle Power

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is within the

charging temperature range indicated in the specifications.

• Verify the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness

• Shorten the display timeout

• Decrease the volume

• Disable Bluetooth wireless technology

• Put the device in sleep mode when not in use

Exiting Sleep

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as a

portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista

Service Pack 3 with Windows Media Player 10.

My device does not appear as a portable

device on my computer

On Mac computers and some Windows computers, the device

connects using USB mass storage mode. In USB mass storage

mode, the device appears as a removable drive or volume, and

not as a portable device. Windows versions prior to Windows XP

Service Pack 3 use USB mass storage mode.

My device does not appear as either a

portable device or a removable drive or

volume on my computer

Disconnect the USB cable from your computer.

Turn off the device.

Plug the USB cable into a USB port on your computer and

into your device.

Troubleshooting

(Mounting and Powering the nüviCam

Vehicle).

(Navigation

Cable).

(Display

Settings).

(Adjusting the

Volume).

(Disabling

Mode).

, and Windows XP

Settings).

(Changing the

Settings).

Bluetooth).

(Entering and