Garmin Streetpilot C320 Manuel de configuration - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Garmin Streetpilot C320. Garmin Streetpilot C320 8 pages. Streetpilot c320
Également pour Garmin Streetpilot C320 : Manuel du propriétaire (37 pages), Manuel de configuration (4 pages), Informations sur la sécurité et les produits (32 pages), Fiche d'information sur le produit (2 pages), Manuel de référence rapide (8 pages), Informations sur le produit (4 pages), Déclaration de conformité (1 pages), Caractéristiques (4 pages), Manuel de configuration (12 pages), Manuel de l'administrateur (42 pages), Manuel de référence rapide (19 pages)

WARNING: See the product information sheet in the product box for product warnings

and other important information.

Step 1: Configure Your c320

Press and hold the

instructions to set up your c320; you only have to do this once.

Step 2: Install Software and Load Maps

Before using your c320, install software on your computer using the DVD-ROM, and then

load maps on your c320. Refer to the setup guide for complete instructions.

Step 3: Mount Your c320

To ensure a tight grip, clean and dry the windshield before mounting the suction cup.

1. Plug the small end of the cable into the

mount and the other end in a 12-Volt

receptacle in your vehicle.

2. Place the suction cup on the windshield.

3. Flip the lever back, toward the windshield.

If necessary, use the tension knob to improve your viewing angle.

Power button on the side of the unit to turn it on. Follow the on-screen

4. Fit the bottom of your c320 into the

cradle of the suction cup mount.

5. Tilt your c320 back until it snaps in

place.

Tension knob