Garmin VIEO RV 851 Manuel du propriétaire - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin VIEO RV 851. Garmin VIEO RV 851 38 pages.
Également pour Garmin VIEO RV 851 : Manuel de démarrage rapide (25 pages)
Imprimer la page
2
Select a zone.
3
Select MORE.
4
Select one or more options:
NOTE: Not all options are available for all zones.
• To limit the maximum volume output of this zone, select
VOLUME LIMIT, and adjust the level.
• To set the subwoofer level for this zone, select SUB
LEVEL, and adjust the level.
• To adjust the right and left speaker balance of this zone,
select BALANCE, and adjust the balance.
Adjusting the Subwoofer Filter
You can use the subwoofer filter setting to control the subwoofer
cutoff frequency for each zone, which can enhance the blend of
the sound produced by the speakers and the subwoofer. Audio
signals above the selected frequency are not passed to the
subwoofer.
NOTE: If a DSP setting has been applied to zone, this setting
cannot be changed on the stereo. You can view the DSP setting
for the optimal cutoff frequency as calculated by the DSP
controller, but cannot adjust it.
1
Select
>
>
>
2
Select a zone.
3
Select SUB FREQ.
4
Select a frequency.
DSP Settings
This stereo features digital signal processing (DSP). You can
select pre-configured DSP settings for Fusion speakers and
amplifiers to optimize audio reproduction in their installed
locations.
All DSP settings are configured using the Fusion-Link
control app
(Fusion-Link Wireless Remote Control App,
page
22).
Configuring the DSP Settings
You must download and install the Fusion-Link remote control
app on your compatible Apple or Android device before you can
configure the DSP settings
Control App, page
22).
You can configure the DSP settings to optimize the sound on
each zone with the installed speakers, amplifiers, and
environment.
1
From the settings menu on your Apple or Android device,
connect to the stereo using Bluetooth technology, or connect
to the same wireless network as the stereo.
2
Open the Fusion-Link remote control app on your compatible
Apple or Android device.
3
If necessary, select the stereo you want to configure.
4
Select
> MUSIC SETTINGS.
5
Select a zone.
6
Select DSP SETTINGS.
7
Configure the DSP settings as needed, depending on the
models of Fusion speakers and amplifiers connected to the
zone.
8
Repeat these steps for each zone.
9
After you have finished configuring the DSP settings for all
zones, select an option:
• On an Apple device, select
SEND DSP SETTINGS
• On an Android device, select
SETTINGS.
Bluetooth Device Playback
You can pair the stereo to up to eight Bluetooth media devices.
Music Playback
> ZONE.
(Fusion-Link Wireless Remote
> Zone > SETTINGS >
> Zone > SEND DSP
You can control the playback using the stereo controls on all
Bluetooth devices, and on some devices you can browse the
music collection from the menu on the stereo. On Bluetooth
devices that do not support media browsing, you should select
the song or playlist on the media device.
The availability of song information such as song title, artist
name, track duration, and album art depends on the capability of
the media player and music application.
Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using
the Bluetooth wireless connection.
You can control the music playback with the media app on a
Bluetooth device or using the Fusion-Link remote control app
(Fusion-Link Wireless Remote Control App, page
1
Select the BT source.
2
Select
your compatible Bluetooth device.
3
Enable Bluetooth on your compatible Bluetooth device.
4
Bring the compatible Bluetooth device within 10 m (33 ft.) of
the stereo.
5
On your compatible Bluetooth device, search for Bluetooth
devices.
6
On your compatible Bluetooth device, select the stereo from
the list of detected devices.
7
On your compatible Bluetooth device, follow the on-screen
instructions to pair and connect to the discovered stereo.
When pairing, your compatible Bluetooth device may ask you
to confirm a code on the stereo. The stereo does not display
a code, but it does connect correctly when you confirm the
message on the Bluetooth device.
8
remote
If your compatible Bluetooth device does not immediately
™
connect to the stereo, repeat steps 1 through 7.
The DISCOVERABLE setting is disabled automatically after two
minutes.
NOTE: On some Bluetooth devices, adjusting the volume on the
device affects the volume level on the stereo.
Bluetooth Range Information
The stereo and Bluetooth wireless devices have a range of 10 m
(33 ft.). For optimal performance, the Bluetooth wireless device
should also have a clear line of sight to the stereo.
Selecting a Different Bluetooth Source
When you have more than one Bluetooth device paired to the
stereo, you can select a different source when needed. You can
pair the stereo with up to eight Bluetooth devices.
1
With the BLUETOOTH source selected, select
2
Select a Bluetooth device.
Bluetooth Source Settings
With the BLUETOOTH source selected, select
DISCOVERABLE: Allows the stereo to be visible to Bluetooth
devices. This setting turns off automatically after two minutes
to prevent possible interruption to audio after pairing a
Bluetooth device to the stereo.
REMOVE DEVICE: Removes the Bluetooth device from the
stereo. To listen to audio from this Bluetooth device again,
you must pair the device again.
USB Device Playback
You can connect various USB media players, USB flash drives,
and smartphones to the stereo. How you access the USB
source depends on the type of connected media player or
smartphone.
> DISCOVERABLE to make the stereo visible to
22).
.
.
15