Garmin G3000 Manuel d'instructions - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Garmin G3000. Garmin G3000 18 pages. Swapping gsa80 roll & gsa80 yaw servo on citation cj3+

Imprimer la page
Garmin G3000 Manuel d'instructions
4) Press and hold the right knob on the left GTC and push the L Touch Control circuit
breaker in.
 Let go when you see initializing.
5) Press and hold the right knob on the right GTC and push the R Touch Control
circuit breaker in.
 Let go when you see initializing.
6) Press and hold the #12 softkey on the #2 PFD and push the R PFD circuit breaker
in.
 Let go when you see initializing.
 PFD 2 should come up in configuration mode.
• SYSTEM STATUS should show at the top of the screen.
7) Press and hold the #12 softkey on the MFD and push the MFD circuit breaker in.
 Let go when you see initializing.
 MFD should come up in configuration mode.
• SYSTEM STATUS should show at the top of the screen.
8) Press and hold the #12 softkey on the #1 PFD and turn on power.
 Let go when you see initializing.
9) Press the NO softkey at "DO YOU WANT TO UPDATE SYSTEM FILES?" prompt.
10) Press the NO softkey at "DO YOU WANT TO UPDATE THE CUSTOM GRAPHICS
FILES (EG, SPLASH SCREEN)?" if it appears.
11) PFD 1 should come up in configuration mode.
 SYSTEM UPLOAD should show at the top of the screen.
Version 1.0
REFERENCE ONLY
REFERENCE ONLY
9