Garmin GNC 420A Addendum au manuel du pilote - Page 22

Parcourez en ligne ou téléchargez le pdf Addendum au manuel du pilote pour {nom_de_la_catégorie} Garmin GNC 420A. Garmin GNC 420A 27 pages. 400/500 series gts 8xx interface
Également pour Garmin GNC 420A : Manuel d'instructions (6 pages), Addendum au manuel du pilote (4 pages), Référence rapide (23 pages), Addendum au manuel du pilote (22 pages)

Section 4

Ryan TCAD Interface

When the target pointer is placed on trafﬁ c, the

trafﬁ c range, squawk code (if available), and tail

number (if available) are displayed.

Monitoring Trafﬁ c

Refer to the information in the TCAD Pilot' s Guide regarding monitoring trafﬁ c on the display and the

corresponding actions to take.

Highlighting Trafﬁ c Data Using Map Panning

Panning is another map page function, which allows you to move the map beyond its current limits

without adjusting the map scale. When you select the panning function—by pressing the small right

knob—a target pointer flashes on the map display. A window also appears at the top of the map display

showing the latitude/longitude position of the pointer, plus the bearing and distance to the pointer from

your present position.

To use the map panning feature:

1. Press the small right knob to activate the panning target pointer.

2. Turn the small right knob to move up (turn clockwise), or down (turn counterclockwise).

3. Turn the large right knob to move right (turn clockwise), or left (turn counterclockwise)

4. To cancel map panning and return to your present position, press the small right knob.

When the target pointer is placed on trafﬁ c, the trafﬁ c range, altitude separation, squawk code (if

available), and tail number (if available) are displayed. The trafﬁ c is identiﬁ ed as follows:

TA: Traffic Advisory. This is traffic within 500 ft. of altitude separation that is

converging or maintaining altitude separation.

PA: Proximity Advisory. This is traffic within 500 ft. of separation and it is not a TA.

TRFC: other traffic.