Garmin echomap 40 series Manuel du propriétaire - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin echomap 40 series. Garmin echomap 40 series 32 pages. Vhf comm
Également pour Garmin echomap 40 series : Manuel d'instructions d'installation (15 pages), Déclaration de conformité (1 pages), Manuel du pilote (22 pages), Manuel du propriétaire (30 pages), Manuel du propriétaire (50 pages)

Front of Boat Offset—this setting is used to correct for any

alignment error that may have occurred during installation of the

scanner. The scanner is directional. For optimal performance it needs

to be pointed directly ahead of the boat. To verify that the scanner

is properly aligned, point the bow of the boat directly at a stationary

object such as a buoy. Check the radar screen to verify that the object

is shown directly ahead of the boat. If it is not, highlight the slider and

move it left or right using the ARROW KEYPAD until the object is

displayed directly in front of the boat. When you are satisﬁed with the

alignment, press the ENTER key to accept the change.

Timed Transmit—is used to save power, likely while at anchor.

When Timed Transmit is On, the radar refers to the settings in Timed

Transmit XMIT Time and Timed Transmit STBY Time. If Off is

selected, the Timed Transmit XMIT Time and Timed Transmit STBY

Time ﬁelds are inactive.

Timed Transmit XMIT Time—this setting determines a time

interval in minutes the radar transmits. For example, if set to 01min,

the radar transmits for a period of one minute before referring to the

Timed Transmit STBY Time.

GMR 20/40 Owner's Manual

GMR 20/40 O

Timed Transmit STBY Time—this setting determines a time

interval in minutes that the radar is in stands by. For example, if set to

10min, the radar stands by for a period of ten minutes before referring

to the Timed Transmit XMIT Time. When the radar is standing by, the

scanner does not rotate or transmit; however power is still applied to

the Magnetron, eliminating the need for a warm-up cycle.

The Display Tab

The Display tab contains settings for: Center Offset, Rings,

Background color, Heading Line, Bearing Reference, and Navigation

Features.

The Display Tab

PERATION

ADAR

DJUSTMENT

ENU