Garmin GNC 420W Manuel de référence rapide - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Garmin GNC 420W. Garmin GNC 420W 25 pages. Garmin gps receiver quick reference guide
Également pour Garmin GNC 420W : Addendum au manuel du pilote (24 pages), Addendum au manuel du pilote (50 pages), Référence rapide (23 pages), Addendum au manuel du pilote (24 pages), Manuel complémentaire (12 pages)
Imprimer la page
Bottom Row Keys
GPS 400W
GNC 420W
GNS 430W
The nearest (NRST) key (GPS 400W
N
and GNC 420W only) displays the nearest
airports page. Then, turning the small right
knob steps through the NRST pages.
In the GNS 430W, the CDI key is used to
C
toggle which navigation source (GPS or
VLOC) provides output to an external HSI or
CDI.
The omni-bearing selector (OBS) key
O
is used for two functions: to activate OBS
selection and as a suspend key.
As a Suspend (SUSP) key, it is used to
select manual or automatic sequencing of
waypoints. Pressing this key selects SUSP
mode, which retains the current "active to"
waypoint as your navigation reference even
after passing the waypoint (i.e., prevents
sequencing to the next waypoint). Press-
ing the OBS key again returns to normal
operation, with automatic sequencing of
waypoints.
Whenever OBS mode is selected, you may
set the desired course to/from a waypoint
using the OBS Page, or an external OBS
selector on your HSI or CDI.
The message (MSG) key is used to view
M
system messages, important warnings, and
requirements.
KEYS
The flight plan (FPL) key allows you to
F
create, edit, activate and invert flight plans,
as well as access approaches, departures and
arrivals. A closest-point-to-flight-plan feature
is also available from the flight plan key.
The procedures (PROC) key allows you
P
to select approaches, departures and arriv-
als from your active flight plan. When using
a flight plan, available procedures for your
departure and/or arrival airport are offered
automatically. Otherwise, you may select the
desired airport, then the desired procedure.
190-00356-01 Rev F
5