Garmin GPS 17HVS - Receiver Module Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Garmin GPS 17HVS - Receiver Module. Garmin GPS 17HVS - Receiver Module 16 pages. Declaration of conformity
Également pour Garmin GPS 17HVS - Receiver Module : Manuel d'instructions d'installation (12 pages), Spécifications techniques (34 pages), Spécifications techniques (40 pages), Spécifications techniques (37 pages), Déclaration de conformité (2 pages)

GPS 17

OUNTING THE

To attach the enclosed pole to the base:

1. Thread the cable though the pole mount.

2. Align the tab on the pole to the notch on the base.

3. Use the enclosed screws to secure the pole to the

base.

Figure 2: Attaching the Pole Mount to the Base

To mount the GPS 17 with cable outside mount:

1. Place the cable in the vertical slot along the side of

the base of the unit.

2. Screw the GPS 17 onto the mount. Do not

overtighten: it is possible to tighten the unit to the

point that the cable may be cut in two.

3. Fill the remaining gap in the cable exit with marine

sealant.

Figure 3: Running the Cable Outside of the Mount

GPS 17 Installation Guide