Garmin GPSMAP 2006 Manuel d'instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garmin GPSMAP 2006. Garmin GPSMAP 2006 12 pages. Garmin gsd 20 marine-remote sounder: release note
Également pour Garmin GPSMAP 2006 : Déclaration de conformité (1 pages), Manuel d'installation (2 pages), Déclaration de conformité (1 pages), Manuel d'installation (8 pages), Manuel du propriétaire (20 pages)
Imprimer la page
I
I
NSTALLATION
NSTRUCTIONS
Surface Mount
Tools
• Drill and Drill Bit
• Screwdriver
• Pencil
• Mounting Hardware (not included)
NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16"
(7.9 mm) in diameter.
To install the Bail Mount and unit:
1. Using the bail mount as a template, mark the location of the four mounting holes.
Be sure to leave at least two inches of clearance behind the unit for the wiring.
2. Using an appropriate size drill bit, drill pilot holes for the fasteners.
3. Secure the bail mount to the surface with the fasteners.
4. Loosen the mounting knobs.
5. Slide the unit into the bail mount and tighten the mounting knobs.
Bail mount
4
I
I
NSTALLATION
NSTRUCTIONS
Mounting knobs
Bail Mount
GPSMAP 2006C/2010C & GPS 17