Garmin GPSMAP 215 Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin GPSMAP 215. Garmin GPSMAP 215 18 pages.
Imprimer la page
Entering Your MMSI Number
You can enter your MMSI number only once. If you must change
your MMSI number after entering it, you must take your radio to
your Garmin
®
dealer for reprogramming.
The Mobile Marine Safety Identity (MMSI) number is a nine-digit
code that acts as a DSC self-identification number, and it is
required to use the DSC capabilities of your radio. You can
obtain an MMSI number from the telecommunications authority
or ship registry for your country. In the USA, you can obtain an
MMSI number from these sources:
• Federal Communications Commission (FCC): assignments
are recognized internationally
• BoatU.S.
, Sea Tow
, or United States Power Squadrons
®
®
assignments are for USA waters only.
1
Select MENU > DSC > MY MMSI.
2
Enter your MMSI number
3
Select ACCEPT.
The radio prompts you to confirm your identity.
4
Enter your MMSI number again, and select ACCEPT.
If the MMSI numbers you entered do not match, a message
appears.
5
If necessary, select RETRY, and enter the number again.
Viewing Your MMSI Number
Select MENU > DSC > MY MMSI.
Distress Calls
When you make a distress call, your call is transmitted to all
DSC-capable radios within receiving range. Your current GPS
position (latitude and longitude) and the current time are
included in the transmission if you have a GPS device
connected to your transceiver. If you manually entered your
position information with the time, that data is transmitted with
the call.
NOTE: You should familiarize yourself with the standard
distress-call format and protocol to ensure your calls are clear
and effective.
Sending an Undesignated Distress Call
When you send an undesignated distress call, the nature of your
emergency is not transmitted to the receiving stations. Sending
an undesignated distress call is a faster procedure that can save
you time during an emergency.
1
Lift the spring-loaded door, and hold DISTRESS for at least 3
seconds.
The radio beeps and counts down the seconds. DISTRESS
CALL COUNTING DOWN appears on the screen.
The radio sounds an alarm, switches to channel 70, and
transmits your call on high (25 W) power.
2
Press any key to silence the alarm sound.
The radio tunes to channel 16 on high (25 W) power.
3
Select PTT on the handset or radio to relay your distress
message.
The radio waits for an acknowledgment (ACK) on channel 70
from a listening station.
Sending a Designated Distress Call
When you send a designated distress call, the nature of your
emergency is transmitted to the receiving stations.
1
Lift the spring-loaded door, and press DISTRESS.
2
Turn the SELECT dial, and select the type of distress call.
Digital Selective Calling
NOTICE
(Entering Text, page
4).
TIP: You can select CLEAR to exit the screen without
sending a distress call.
3
Hold DISTRESS for at least three seconds.
The radio beeps and counts down the seconds. DISTRESS
CALL COUNTING DOWN appears on the screen.
The radio sounds an alarm, switches to channel 70, and
transmits your call on high (25 W) power.
4
Press any key to silence the alarm sound.
The radio tunes to channel 16 on high (25 W) power.
5
Select PTT on the handset or radio to relay your message.
The radio waits for an acknowledgment (ACK) on channel 70
from a listening station.
Waiting For and Receiving and Acknowledgment for a
:
®
Distress Call
If the radio does not receive an acknowledgment for a distress
call, the radio retransmits the distress call randomly between 3.5
to 4.5 minutes later, and continues to retransmit the distress call
at random intervals until the radio receives an acknowledgment.
When the radio receives the acknowledgment, it begins beeping
and DISTRSS ACK appears on the screen.
1
Press any key to turn off the beeping.
2
Select
to view additional information.
TIP: If the MMSI of the station transmitting the
acknowledgment signal is an entry in your directory, the
name associated with the MMSI number appears on the
screen. If the MMSI of the station is not in your directory, the
MMSI number appears on the screen.
3
Select ACCEPT.
Stopping Automatic Retransmission of Distress Calls
Select CANCEL.
The radio remains tuned to channel 16.
NOTE: Selecting CANCEL ends the automatic repetition of
the call, but does not communicate to other stations that you
no longer have an emergency. If you no longer have an
emergency, you should revoke the distress call
Distress Call, page
Revoking a Distress Call
You do not transmit a distress call until you hold DISTRESS for
at least three seconds. If you inadvertently make a distress call,
or are no longer in distress, you should cancel the call
immediately by transmitting a voice message to all stations on
channel 16.
1
Select CANCEL > YES, and wait until DISTRESS CANCEL
HAS BEEN SENT appears on the screen.
2
Select OK.
3
Hold PTT on the handset, and transmit an appropriate voice
message to cancel the distress call
Cancellation Script, page
4
Select an option:
• Select END to complete the distress-call cancellation and
return to normal radio operation.
• Select RESEND to resend the distress-call cancellation
and start the process again.
Distress Call Cancellation Script
When you revoke a DSC distress call
page
5), you should transmit an appropriate cancellation
message.
For example, "All stations, all stations, all stations, this is
_____(vessel name), MMSI number ____, position ____(North
or South), ____(West or East). Cancel my distress alert of
____(date and time). This is ____(vessel name), MMSI number
____. Out."
5).
(Distress Call
5).
(Revoking a Distress Call,
(Revoking a
5