Garmin GPSMAP 400 series Manuel du pilote - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel du pilote pour {nom_de_la_catégorie} Garmin GPSMAP 400 series. Garmin GPSMAP 400 series 28 pages. Non-waas; display interfaces
Également pour Garmin GPSMAP 400 series : Manuel d'instructions (6 pages), Addendum au manuel du pilote (27 pages), Manuel de référence rapide (2 pages), Manuel de référence (2 pages), Manuel d'instructions d'installation (28 pages), Manuel d'instructions d'installation (30 pages), Modèle de manuel (2 pages), Modèle (1 pages), Manuel de configuration (2 pages), Manuel de référence rapide (2 pages)

SECTION 4

RYAN TCAD INTERFACE

Air Shield

Refer to the TCAD Pilot' s Handbook for a detailed

description of the Air Shield.

Trafﬁc Warning Window

When the unit is not on the trafﬁc page and a trafﬁc

threat is imminent, the Trafﬁc Warning Window (Figure

4-7) is displayed. The Warning Window shows a small

thumbnail map and can display the Trafﬁc Page (press the

ENT Key) or return to the previous page (press the CLR

Key).

NOTE: The Trafﬁc Warning Window is disabled

when the aircraft ground speed is less than 30

knots or when an approach is active.

Figure 4-7 Trafﬁc Warning Window

4-6

Refer to the TCAD Pilot' s Handbook for a detailed

description of the Air Shield.

Voice and tones are used to alert the pilot. The alert

descriptions used by TCAD are listed in the TCAD Pilot' s

Handbook. Voice is used only during the highest level

of alerting; otherwise, tone is used. The voice alerting

can be turned on or off from the TCAD Setup Page or

from the conﬁguration pages. See the Garmin 400/500

Series Installation Manual available at authorized Garmin

Service Centers (only for the 9900 model).

If the unit fails to detect the TCAD or if the TCAD data

that is received is invalid, the trafﬁc screen shows "DATA

FAIL".

Refer to the TCAD Pilot' s Handbook for limitations of

the TCAD system.

400/500 Series Display Interfaces

190-00140-10 Rev. E