AEG NC4003000 Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG NC4003000. AEG NC4003000 28 pages. Oven
Imprimer la page
Catalytic walls
The walls with a catalytic coating are self-cleaning. They absorb fat which collects on walls
while the oven operates.
To support this self-cleaning process heat the oven without any food regularly:
1.
Open the oven door.
2.
Remove all accessories from the oven.
3.
Close the door.
4.
Set the maximum oven temperature and let the oven operate for 1 hour.
5.
Clean the oven cavity with a soft and damp sponge.
CAUTION!
Do not attempt to clean catalytic surfaces with oven sprays, abrasive cleaners, soap or other
cleaning agents. This may damage the catalytic surface.
Discolouration of the catalytic surface has no effect on catalytic properties.
Shelf Support Rails
Removing the shelf support rails
1.
Pull the front of the shelf support rail
away from the side wall.
2.
Pull the rear shelf support rail away
from the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
Important! The rounded ends of the shelf support rails must point to the front!
Care and cleaning
19