AEG NC7003000 Manuel de l'utilisateur - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG NC7003000. AEG NC7003000 36 pages. Oven
Également pour AEG NC7003000 : Manuel de l'utilisateur (36 pages)

Imprimer la page

Problem

The oven does not heat up

The oven lamp does not oper-

ate

The display shows an error code

that is not in this list

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Possible cause

The fuse is released

The oven lamp is defective

There is an electronic fault

Installation

Solution

Make sure, if the fuse is the

cause for the malfunction. If

the fuse releases again and

again, refer to an authorized

electrician

Replace the oven lamp

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows the er-

ror code again, refer to the

Customer Care Department

.........................................