AEG 911536410 Manuel de l'utilisateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG 911536410. AEG 911536410 28 pages.

Imprimer la page

Problem and alarm code

The remaining time in the

display increases and skips

nearly to the end of the pro-

gramme duration.

Small leak from the appli-

ance door.

The appliance door is diffi-

cult to close.

Rattling or knocking sounds

from the inside of the appli-

ance.

The appliance trips the cir-

cuit-beaker.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

11.1 The washing and drying results are not satisfactory

Problem

Poor washing results.

Possible cause and solution

• This is not a defect. The appliance is working correctly.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and the basket

loading leaflet.

• Use more intensive washing programme.

• Activate the ExtraPower option to improve the wash-

ing results of a selected programme.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

ENGLISH