AEG Dishwasher Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG Dishwasher. AEG Dishwasher 24 pages.

Imprimer la page

USING THE DETERGENT

SETTING AND STARTING A

PROGRAMME

Setting mode

The appliance must be in setting mode

to accept some operations.

The appliance is in setting mode when,

after the activation:

• All the programme indicators come

on.

• The display shows two horizontal sta-

tus bars.

If the control panel shows other condi-

tions, press and hold Delay and Start

at the same time until the appliance is

in setting mode.

Starting a programme without

delay start

1. Press the release button (B) to

2. Put the detergent in the compart-

3. If the programme has a prewash

4. If you use detergent tablets, put

5. Close the lid. Make sure that the

1. Open the water tap.

2. Press the on/off button to activate

3. Close the appliance door.

4. Make sure that the appliance is in

5. Press Program again and again un-

6. If you want, you can set the options.

7. Press Start. The programme starts.

CAUTION!

Use only detergents for dish-

washers.

open the lid (C).

ment (A) .

phase, put a small quantity of de-

tergent on the inner part of the ap-

pliance door.

the tablet in the compartment (A).

release button locks into position.

Do not use more than the cor-

rect quantity of detergent. Refer

to the instructions on the deter-

gent packaging.

Detergent tablets do not fully

dissolve with short programmes

and detergent residues can stay

on the dishes.

We recommend that you use

detergent tablets with long pro-

grammes.

the appliance.

setting mode.

til the indicator of the programme

that you want to set comes on.

• The programme duration flashes

in the display.

• The phase indicators of the set

programme come on.

• Only the indicator of the phase in

operation stays on.

ENGLISH