Garmin Colorado 400c Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Garmin Colorado 400c. Garmin Colorado 400c 2 pages. Oregon series
Également pour Garmin Colorado 400c : Manuel du propriétaire (40 pages), Manuel du propriétaire (48 pages), Manuel de référence rapide (2 pages), Manuel du propriétaire (48 pages), Informations importantes en matière de sécurité (48 pages), Manuel du propriétaire (26 pages), Manuel (danois) (48 pages)

Garmin Colorado 400c Manuel de démarrage rapide
Waypoints
To use the Shortcuts menu:
1. Select Shortcuts. The Shortcuts
menu appears.
2. Rotate the Rock 'n Roller™ to the
preferred application and press
ENTER.
To mark a waypoint:
1. From the Map page, select
Shortcuts. Rotate the Rock 'n
Roller and select Mark Waypoint.
Mark Waypoint
The screen shows that the waypoint
on Shortcuts
was successfully saved. A three-digit
number is assigned to the new
waypoint (your current location).
2. Select Done to save the waypoint.
Select Edit to edit the waypoint
properties. Select Cancel to delete
the waypoint.
To go to a waypoint:
1. Select Shortcuts > Where To? >
Waypoints.
Waypoint Saved
2. Highlight the preferred waypoint
and press ENTER. A green circle
containing the word Go appears.
3. Press ENTER to begin navigating to
the waypoint, or press Options to
project or edit the waypoint.
4. To stop navigation, select Shortcuts
> Stop Navigation.
Waypoint Page
190-00751-01_0A.indd 1
System Status
To adjust the backlight level:
1. Press and quickly release the Power key. The System
Status page on the Colorado appears.
2. Rotate the Rock 'n Roller clockwise or counter-clockwise
to increase or decrease the backlight.
3. Select Back to close the System Status page and return to
the previous page.
Time, day, and date
Battery level
GPS signal
strength
Backlight
adjustment
System Status Page
Note: The System Status page is also a quick way to check
the time, day, date, battery level, and GPS signal strength.
Map Page
To access the Map page:
1. Select Shortcuts > Map.
2. Select Options to show the Data fields, change the Data
fields, or hide the soft key labels.
To zoom in and out on the Map page:
1. Rotate the Rock 'n Roller clockwise to zoom in.
2. Rotate the Rock 'n Roller counter-clockwise to zoom out.
Zoom scale
Zoom In View
Zoom Out View
To pan across the map:
1 Press up, down, left, and right on the Rock 'n Roller to
move the cursor on the map.
2. Select Done to stop panning.
Please visit www.garmin.com for additional
documentation and information.
190-00751-01 Rev. A © 2007 Garmin Ltd. or its subsidiaries
Printed in Taiwan
Quick Start Guide
Colorado
Series
all-terrain GPS navigator
10/19/2007 10:36:08 AM