AEG F55210VI0 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG F55210VI0. AEG F55210VI0 20 pages.

Imprimer la page

The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

Water hardness

German degrees (°dH)

0 - 5

6 - 11

12 - 17

18 - 22

23 - 34

35 - 45

1) Factory setting.

If you use standard detergent, set a

proper water hardness level to keep

the salt refill indicator active.

6.3 Use of detergent

CAUTION!

Use only detergents for

dishwashers.

To help the environment, do

not use more than the

recommended quantity of

detergent given by the

detergent manufacturer.

Refill the detergent

dispenser before each wash

cycle.

in your area. It is important to set the

right level of the water softener to assure

good washing results.

To change the water softener setting:

1. Open the door

2. Press and hold Programme for 5

seconds . Current water softener

level appears.

3. Press Programme to set the

necessary water softener level

4. Do not change the setting for 5

seconds to confirm the choice.

International unit

(mmol/l)

0.0 - 0.9

1.0 - 2.0

2.1 - 3.0

3.1 - 4.0

4.1 - 6.1

6.2 - 8.0

Filling the detergent dispenser

1. Press the release button to open the

lid of the detergent dispenser.

2. Put the detergent (approximately 15

g) in the compartment (C). The

compartment has 2 parts (D) and (E)

that refer to different quantities of

detergent (15 g and 25 g). Put

ENGLISH

Water softener level