Garmin GMI 10 Manuel d'instructions d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garmin GMI 10. Garmin GMI 10 8 pages. Flush moun template
Également pour Garmin GMI 10 : Manuel de démarrage rapide (20 pages), Manuel d'instructions d'installation (8 pages), Manuel d'instructions d'installation (8 pages), Modèle (1 pages), Instructions (2 pages), Manuel de démarrage rapide (21 pages)

Imprimer la page
Garmin GMI 10 Manuel d'instructions d'installation
Connecting the GMI 10 through NMEA 0183
The GMI 10 can receive NMEA 0183 data from one device. The GMI 10 displays the received data, but cannot transmit
the data to another NMEA 0183 device or transmit the data to a NMEA 2000 network.
Use the diagrams to wire a NMEA 0183 device to your GMI 10. Use 22 AWG, shielded, twisted-pair wiring for
extended runs of wire. Solder all connections and seal them with heat-shrink tubing.
GMI 10 
Device
GMI 10 
Device
GMI 10 
Device
Notes:
• Consult the instructions for your NMEA 0183-compliant device to identify the Tx/A(+) and Tx/ B(-) wires.
• When connecting NMEA 0183 devices with two transmitting and two receiving lines, it is not necessary for the
NMEA 2000 bus and the NMEA 0183 device to connect to a common ground.
• The yellow (accessory on) wire and the black (accessory ground) wire are used only when wiring the GMI 10 to a
Garmin GPS 17/17x antenna.
GMI 10 Installation Instructions
GMI 10 Data Cable
WIRE 
COLOR
BLACK
YELLOW
BLUE
>
WHITE
>
BROWN
>
GREEN
>
Wiring the GMI 10 to a GPS 17x NMEA 0183 HVS Antenna
WIRE 
COLOR
BROWN
>
GREEN
>
Wiring the GMI 10 to a Standard NMEA 0183 Device
Color
Black
Yellow
Blue
>
White
>
Brown
>
Green
>
-
+
Battery
WIRE 
12 Vdc
COLOR
RED
BLACK
ORANGE
WHITE
WHITE/ 
ORANGE
GRAY
WHITE/ 
RED
-
+
Battery
12 Vdc
WIRE 
FUNCTION
POWER
POWER GND
Tx/A (+)
Tx/B (-)
Function
Accessory Off(-)
Accessory On(+)
Tx/A(+)
Tx/B(-)
Rx/A(+)
Rx/B(-)
GPS 17/17x 
NMEA 0183 
 HVS Antenna
>
>
>
>
NMEA 0183 
 Compliant Device
>
>
5