AEG F89078VI-S Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG F89078VI-S. AEG F89078VI-S 20 pages. 18” fully integrated dish washer
Également pour AEG F89078VI-S : Manuel de l'utilisateur (35 pages), Manuel général (43 pages)

AEG F89078VI-S Manuel de l'utilisateur
EN
2.2.2

Selecting and starting the program

Press the
dicator light corresponding to the required program turns on (ref. 2 fi g. 2-02);
if required, press the relative buttons to select any complementary functions
(e.g.: "half-load", "program delay"; see para 2.2.7 "options");
close the door; the program will start after about
indicator light will fl ash throughout the cycle (program¬ running signal).
SUPPLEMENTARY PROGRAMS
The supplementary program button (ref. 6 fi g. 2-02) adds fi ve extra programs to
the ones that can be directly selected with the program selection button.
Press the button (the indicator light turns on) after selecting the "main" program
(see 1, 2, 3, 4, 5 in tab. 2-02a).
As the function is memorized, press the button again (the indicator light turns
off ) if you wish to run one of the 5 main programs for the next cycle.
2.2.3

End of program

The end of the program is signaled by a short beep. Additionally the indicator
light of the normal and strong programs (marked "end") fl ash.
2.2.4
To interrupt the current program simply open the door of the dishwasher; to re-
start the program, simply close the door again. The program restarts from where
it was interrupted.
2.2.5

Changing the current program

To change the current program, simply open the door of the dishwasher and se-
lect the new program. Close the door to run the new program automatically.
12
program selection button (ref. 3 fi g. 2-02) several times until the in-
If the door of the dishwasher has not been closed or has been incorrectly
closed, the washing cycle will not begin.

Interrupting a program

USER INSTRUCTIONS
2 seconds and the relative
Rev 0.0