AEG F89078VI-S Manuel général - Page 40

Parcourez en ligne ou téléchargez le pdf Manuel général pour {nom_de_la_catégorie} AEG F89078VI-S. AEG F89078VI-S 43 pages. 18” fully integrated dish washer
Également pour AEG F89078VI-S : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (20 pages)

AEG F89078VI-S Manuel général
EN
Prolonged disuse
Run the soak program
Unplug the power
Leave
the door slightly open in order to prevent the formation of unpleasant
odors inside the washing tank.
Fill the rinse-aid dispenser
Shut off the water supply tap
Before starting the dishwasher after prolonged disuse
Check that there are no deposits of sludge or rust inside the water pipe: if there
are, allow the water to run from the water supply tap for a few minutes.
Plug the power cord
Reconnect the water intake hose and open the tap again
5.6

Troubleshooting minor problems

In some cases it is possible to remedy minor problems by referring to the follow-
ing instructions:
If the program fails to start, check that:
the dishwasher is connected to the electrical power supply;
there is no power failure;
the water tap is open;
the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
the drain hose is not kinked
the drain siphon is not obstructed;
the dishwasher fi lters are not clogged.
If the dishes do not come out clean, check that:
the correct amount of detergent has been added;
there is regenerating salt inside the special container;
the dishes are being loaded correctly;
the selected program is suitable for the dish types and their degree of soiling;
all the fi lters are clean and positioned correctly;
the spray arm nozzles are not obstructed;
there is no object obstructing the rotation of the spray arms.
40
USER INSTRUCTIONS
twice in succession.
cord from the socket.
.
.
back into the socket.
.
Rev 0.0