AEG FAV55VI3P Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG FAV55VI3P. AEG FAV55VI3P 32 pages.

Imprimer la page

www.aeg.com

8. DAILY USE

1. Open the water tap.

2. Press and hold

is activated.

3. Fill the salt container if it is empty.

4. Fill the rinse aid dispenser if it is

empty.

5. Load the baskets.

6. Add the detergent.

7. Select and start a programme.

8. Close the water tap when the

programme is complete.

8.1 Using the detergent

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent (gel, powder or

tablets) in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

For information about the

detergent dosage, refer to

the manufacturer's

instructions on the

packaging of the product.

Usually, 20 - 25 ml of gel

detergent is adequate for

washing a load with normal

soil.

until the appliance

The upper ends of the two

vertical ribs inside the

compartment (B) indicate

the maximum level for filling

the dispenser with gel (max.

30ml).

8.2 How to select and start a

programme using MY TIME

selection bar

1. Slide your finger across MY TIME

selection bar to choose a suitable

programme.

• The light related to the selected

programme is on.

• The ECOMETER indicates the

level of energy and water

consumption.

• The display shows the

programme duration.

2. Activate applicable EXTRAS if

desired.

3. Close the appliance door to start the

programme.

8.3 How to activate EXTRAS

1. Select a programme using MY TIME

selection bar.

2. Press the button dedicated to the

option you want to activate.

• The light related to the button is

on.

• The display shows the updated

programme duration.

• The ECOMETER indicates the

updated level of energy and water

consumption.

By default, options must be

activated every time before

you start a programme.

If the latest programme

selection is enabled, the

saved options are activated

automatically along with the

programme.