AEG FAVORIT 34502VI0 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG FAVORIT 34502VI0. AEG FAVORIT 34502VI0 20 pages.
Imprimer la page5. OPTIONS
Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.
There is also an acoustic signal that op-
erates when the programme is comple-
ted. By default, this acoustic signal is off,
but it is possible to activate it.
How to activate the acoustic signal for
the end of programme
1. Press the on/off button to activate
the appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the
programme indicator
flash and the programme indicator
light.
6. BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
starts to
comes on with fixed
4. Press immediately Program.
• The programme indicator
comes on with fixed light.
• The programme indicator
5. Wait until the programme indicator
goes off. The programme in-
dicator
flash.
6. Press Program. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
7. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to "How to activate the acous-
tic signal for the end of programme"
and follow the procedure from step
(1) to step (5). The end indicator is on.
2. Press Program. The end indicator
goes off. The acoustic signal for the
end of programme is deactivated.
3. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
ENGLISH
7
starts to flash.
continues to