Garmin Reactor 40 Manuel d'instructions d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garmin Reactor 40. Garmin Reactor 40 25 pages. Mechanical
Également pour Garmin Reactor 40 : Manuel d'instructions d'installation (11 pages), Manuel d'instructions d'installation (13 pages), Manuel d'instructions d'installation (29 pages), Manuel de configuration (8 pages)

COMPACT REACTOR

40 HYDRAULIC

™

INSTALLATION INSTRUCTIONS

Important Safety Information

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

To avoid possible personal injury and damage to your boat, the autopilot system should be installed by a

qualified marine installer. Specific knowledge of marine steering and electrical systems is required for proper

installation.

You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your

capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid

navigational hazards and never leave the helm unattended.

Always be prepared to promptly regain manual control of your boat.

Learn to operate the autopilot on calm and hazard-free open water.

Use caution when operating the autopilot near hazards in the water, such as docks, pilings, and other boats.

CAUTION

Failure to install and maintain this equipment in accordance with these instructions could result in damage or

injury.

When in use, beware of hot surfaces on the heat-sink, motor, and solenoid components.

When in use, beware the risk of entrapment or pinching from moving parts.

Installation Preparation

The autopilot system consists of multiple components. You should familiarize yourself with all of the

component mounting and connection considerations before beginning installation. You must know how the

components operate together in order to correctly plan the installation on your boat.

You can consult the layout diagrams to help understand the mounting and connection considerations.

You should lay out all of the components on the boat as you plan the installation to make sure your cables will

reach each component. If needed, extension cables (sold separately) for various components are available from

your Garmin

dealer or from garmin.com.

You should record the serial number of each component for registration and warranty purposes.

May 2022

GUID-E60BF24E-0510-46B3-8BEC-D55273E88F18 v3