AEG Favorit 65080 Vi Manuel de l'utilisateur - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG Favorit 65080 Vi. AEG Favorit 65080 Vi 40 pages. Electrolux dishwasher product manual

Imprimer la page

Dishwashers That Can be Integrated

(see installation template supplied)

Using the installation template supplied, split cupboard doors can be easily in

stalled and firmly fitted.

Connecting the dishwasher

Connecting to the water supply

• The dishwasher can be connected to cold or hot water supplies up to max.

60°C.

• The dishwasher must not be connected to open hot water appliances or in

stantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

0,1 MPa ( = 1 bar = 10 N/cm

Highest permitted water pressure:

1 MPa ( = 10 bar = 100 N/cm

Connecting the inlet hose

The water inlet hose must not be kinked, crushed or entangled when it is being

connected.

Connect the threaded hose fitting (ISO 228 1:2000) on the water inlet hose to a

tap with an external thread (¾ inch). The inlet hose is fitted with either a plastic

or a metal nut:

– Only tighten the nut hand tight.

Then do a visual check for water tightness. (Make sure that the tap is not drip

ping.)

So that access to the tap in the kitchen is not restricted by the use of the dish

washer, we recommend installing an additional tap, or fitting a T branch to the

existing tap.

Consult your plumber if the water pressure is

)

less than 0,1 MPa

If the water pressure is greater than

1 MPa, a pressure reduction valve must be used

)

(available from your dealer).

Connecting the dishwasher