AEG FAVORIT 78002 VI Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG FAVORIT 78002 VI. AEG FAVORIT 78002 VI 36 pages.

Acoustic signals

You can hear the acoustic signals when:

• The washing program is completed.

• You adjust electronically the level of the water softener.

• The appliance has a malfunction.

Factory setting: acoustic signals active.

Deactivating the acoustic signals

1. Switch on the appliance. Make sure that the appliance is in setting mode.

2. Press and hold button (4) and button (5) at the same time until the indicators of but-

tons (3), (4) and (5) flash.

3. Release button (4) and button (5).

4. Press button (5),

• The indicators of button (3) and button (4) go off.

• The indicator of button (5) continues to flash.

• The display shows the setting of the acoustic signals.

5. Press button (5) to change the setting. The display shows the new adjustment.

6. Switch off the appliance to confirm.

To activate the acoustic signals again, do steps (1) through (6).

USE OF THE APPLIANCE

Refer to the specific instructions for each step of the procedure.

1. Check if the water softener level is correct for the water hardness in your area. If neces-

sary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing program for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

7. Start the washing program.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), set the multitab function.

Refer to 'Multitab function'.

Use of the appliance

Acoustic signals activated.

Acoustic signals deactivated.