Brother DCP-J125 Manuel de l'utilisateur avancé - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother DCP-J125. Brother DCP-J125 30 pages.
Également pour Brother DCP-J125 : Manuel d'installation rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel de l'utilisateur avancé (27 pages), Manuel d'installation rapide (2 pages)
Imprimer la page
3
Making copies
Copy settings
You can change the copy settings temporarily
for the next copy.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying.
To change a setting, press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
When you are finished choosing settings,
press Black Start or Color Start.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 7.)
Stop copying
To stop copying, press Stop/Exit.
4
Changing copy quality
3
You can choose the copy quality. The factory
setting is Normal.
Fast copy speed and lowest
Fast
amount of ink used. Use this
setting to save time (documents to
be proof read, large documents or
many copies).
Recommended setting for ordinary
Normal
printouts. Good copy quality with
adequate copy speed.
Use this setting to copy precise
Best
images such as photographs. The
highest resolution and slowest
speed.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Quality.
Press OK.
3
d
Press a or b to choose Fast, Normal or
Best.
Press OK.
e
If you do not want to change additional
settings, press Black Start or
Color Start.
3
3