Fujitsu AGTG09KVCA Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Fujitsu AGTG09KVCA. Fujitsu AGTG09KVCA 16 pages.

Remote controller display

In this section, all the possible indicators are displayed for description.

In actual operation, the display is linked with the button operation, and

only shows the necessary indicators for each setting.

Signal transmitter

Aim at the signal receiver of the indoor unit properly.

• Operating range is approximately 7 m.

• [

] will appear when the signal is transmitted.

• The indoor unit will emit a beep when it receive the signal

properly. If there is no beep, press the button again.

For Powerful operation ................. Refer to page 8.

Activates or deactivates the Powerful

operation.

For Airflow settings ....................... Refer to page 5.

Controls the fan speed.

Sets the automatic Swing operation.

Controls the up and down airflow direction.

For Timer operations ..................... Refer to page 5.

Activates or deactivates the Weekly timer.

Activates or deactivates the On timer, Off

timer, or Program timer.

Activates or deactivates the Sleep timer.

Starts the timer setting.

Sends the timer or clock setting to the indoor

unit.

Forwards the timer or clock setting to the

next step.

Returns the timer or clock setting to the

previous step.

Adjusts the value of the timer or clock

settings.

Starts the clock setting.

After replacing batteries

Press this button as shown in the following figure.

Use a tip of a ballpoint pen or other small object.

RESET

En-4