AEG JSV5520 Livret d'instructions - Page 20

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} AEG JSV5520. AEG JSV5520 37 pages.

Instruction book

Cancelling the drying phase

In case you do not want to wait until the drying phase is completed, you

can cancel it by open the door. The drying phase is now cancelled.

The programme start can be delayed by 3, 6 or 9 hours.

1. Press in the On/Off button.

2. Press the delay start button repeatedly, until the lamp next to the

required hours of delay is lit.

3. Press the button for the required programme.

4. After the set delayed start time has elapsed, the programme starts.

Reset the delayed start:

If the programme has not started, you can change the set time with the

delay start button.

Cancelling the delayed start:

If the programme has not started, the delayed start can be cancelled. Press

the delay start button repeatedly, until none of the lamps next to the hours

are lit. The required programme starts immediately.

Before switching the buzzer off must all programmes have completed.

1. Press in the On/Off button.

2. Press the combination buttons simultaneously and hold them pres-

sed in. When the first three programme indicator lamps starts to

flash, you can let go of the buttons.

3. Press the buzzer button once. The lamp for the buzzer button

starts to flash and the lamp for the ended programme cycle is lit.

Press the button once more and the lamp for the ended programme

cycle goes out. Now the buzzer is off.

4. Press out the On/Off button to complete the setting.

To reset the function, follow steps 1 and 2 above and then press

the buzzer button twice, until the lamp for the ended programme

cycle is lit again.