AEG OKO FAVORIT 40660 i Instructions pour l'utilisateur - Page 27

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} AEG OKO FAVORIT 40660 i. AEG OKO FAVORIT 40660 i 44 pages. Aeg dishwasher
Également pour AEG OKO FAVORIT 40660 i : Informations sur l'utilisateur (44 pages), Instructions pour l'utilisateur (40 pages), Instructions pour l'utilisateur (44 pages), Instructions pour l'utilisateur (48 pages)

AEG OKO FAVORIT 40660 i Instructions pour l'utilisateur
0
1. Open the door of the dishwasher. The wash programme stops.
2. The indicator for the programme that is currently running extinguishes.
3. Close the door. The wash programme continues.
Cancelling the wash programme
1. Press the button for the current wash programme and hold it pressed.
0
The programme indicator for the current wash programme flashes for a
few seconds and then extinguishes.
2. Release the programme button, the wash programme is cancelled.
A selected programme is only interrupted by switching off the dish-
3
washer, it is not cancelled. The wash programme is continued when the
dishwasher is switched on again.

Setting or changing the start delay

Using the start delay timer you can adjust when within the next 19
hours the programme is to begin.
Setting the start delay:
0
1. Press the ON/OFF button.
2. Continue pressing the DELAY TIMER button b until the number of
hours until the start of the programme is flashing in the multi-display.
3. Press the button for the desired programme.
The length of the selected programme will flash for a moment in the
multi-display, and then it will display the selected starting time again.
As soon as the number of hours is displayed without flashing, the start
delay has been activated.
The programme will start automatically following a countdown of the
hours set.
Changing the start delay:
As long as the programme has not started, you can still change the
start delay set by pressing the DELAY TIMER button until the desired
start delay is shown in the multi-display.
Cancelling the start delay:
As long as the programme has not started you are still able to cancel
the start delay. Continue pressing the DELAY TIMER button until the
length of the selected programme appears in the multi-display. The
selected programme will begin immediately.
Operating Instructions
27