AEG oko favorit 8081 Manuel d'utilisation - Page 37
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG oko favorit 8081. AEG oko favorit 8081 44 pages. Dishwasher
Également pour AEG oko favorit 8081 : Manuel d'utilisation (48 pages), Manuel d'utilisation (49 pages)
Imprimer la page
N
AUF-3
GB/EU
installation
Installing your dishwasher
Your dishwasher must be installed stably and horizontally (align with a spirit level) on
a firm floor. The adjustable feet can be unscrewed with the spanner supplied to equa-
lise floor irregularities and to adjust the machine height to other pieces of furniture.
If your dishwasher is installed under a continuous worktop, please note the following:
~ The drain hose, supply hose, and mains lead must retain free mobility when run in-
side the plinth cavity. This is to prevent the hoses and lead from being kinked or
squashed.
— When integrating build-under appliances able to be fitted with a decorative trim are
being installed, it must be additionally ensured that the machine is firmly screwed
to the continuous worktop or to the adjacent furniture. It is imperative to take this
measure to guarantee the necessary tilt safety as per VDE specifications.
Depending on model, the dishwashers should be installed as follows:
Integrating machines (I-models)
To install, see the installation template supplied.
Important:
The appliance door can be lined with a wood panel/furniture panel of the following
dimensions:
Width:
591 mm — 594 mm
Thickness: 16 mm — 24 mm
Height:
depending on
— recess height
— plinth height
— matchup to the joint runs of adjacent furniture (e. g. drawer), though
max. 600 mm.
Important note! Should the furniture panel be longer than 600 mm, the appliance
door cannot be fully opened (the furniture panel bumps against the plinth). In this case,
the plinth must be cut out (see installation template) or overlength door hinge kit
BLT 60 used. You can obtain this under E-No. 911 239.008.
121