AEG oko favorit 8081 Manuel d'utilisation - Page 41
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG oko favorit 8081. AEG oko favorit 8081 44 pages. Dishwasher
Également pour AEG oko favorit 8081 : Manuel d'utilisation (48 pages), Manuel d'utilisation (49 pages)
Imprimer la page
GB/EU
WSS-1(1)
GB/EU
- ELA-1(1)
Water protection system
To protect your dishwasher from water damage, it is equipped with a water pro-
tection system.
Apart from an overflow protection, which prevents uncontrolled rising of water in
the appliance, it also features an outlet protection (float switch in the floor tray).
This responds in the event of any untightness in the machine.
In all cases of malfunction, the water supply is immediately interrupted and the
drain pump switched on. This prevents water from either flowing out or over-
flowing. Any residual water in the appliance is automatically pumped away. The
pump also operates even if the machine is switched off and should not be dis-
connected from the electricity supply.
A fault is recognised by the fact that a continuous buzzing sound can be heard
when the machine is switched on.
Olf a fault occurs, first turn off the water tap. Then switch off your machine and
pull the plug out of the plug socket. If there is a fixed connection, switch off or
unscrew the fuse(s).
Electrical connection
According to the technical connection conditions of the electricity companies, a
fixed connection to the mains supply may only be made by an approved electri-
cal installer.
Comply with the VDE specifications when connecting the machine and also where
necessary with the additional regulations of the local electricity companies. After
installation, live parts and insulated lines should not be accessible with the test
finger to EN 60835/DIN VDE 0700.
Details of the electrical connection are given on the rating plate. This is located
on the RH inside edge of the door. If the machine is convertible, the changeover
diagram directions given on the mains junction box must also be observed.
During appliance connection, it is essential to ensure that the nominal voltage and
current type specified on the rating plate are the same as the mains voltage and
current type at the installation site. The necessary electrical fusing is also indi-
cated on the rating plate.
To disconnect the dishwasher from the mains supply, pull out the plug. Should
the appliance have a fixed wiring connection with the mains supply, it must be
disconnected by appropriate measures on the fixed wiring side (fuses, auto-
matic cutout, spurious current protection switch, or the like which
have a
contact opening width > 3 mm).
425