a-gear OPM HOPM-PON-S Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} a-gear OPM HOPM-PON-S. a-gear OPM HOPM-PON-S 20 pages. Pon optical power meter
Imprimer la pageA-GEAR World Wide Manufacturing
As shown in above figure, when there is no optical signal to be tested, the power level
will show -40dBm at 1310nm&1550nm and -50dBm at 1550nm, when the optical
signal is present, the unit will display the corresponding tested value. «Thresh Sel
5» is the name of current viewed data, 0002 here means the total quantity of saved
measurements data. Use
gistory data. If there is no measurements is saved in the unit, it will display «No
Record».
4.3.10.2.
«Del Cur»
Under «History data», use
delete the current data as shown in below figure.
4.3.10.3.
«Del All»
Under «History data», use
to delete all the saved history data as shown in below figure.
and
to choose or change the different saved
and
to highlight «Del Cur», press to confirm to
and
to highlight «Del All», press
OPM HOPM-PON-S
datasheet
to confirm
a-gear.net
Раge 11 of 20