AEG OKO-FAVORIT 54750 VI Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG OKO-FAVORIT 54750 VI. AEG OKO-FAVORIT 54750 VI 36 pages. Electrolux operating instructions dishwasher favorit 64800
Également pour AEG OKO-FAVORIT 54750 VI : Manuel d'utilisation (42 pages)

Imprimer la page

Before using your dishwasher for the first time

1. Ensure that the electrical and water connections comply with the

installation instructions.

2. Remove all packaging from inside the appliance.

3. Set the water softener.

4. Pour a litre of water inside the salt container and then fill with salt.

5. Fill the rinse-aid dispenser.

Setting the water hardness range

The dishwasher is equipped with a water softener designed to remove minerals and

salts from the water supply, which would have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, German, French degrees and PPM

(parts per Million).

The softener should be adjusted according to the hardness of the water in your area.

Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 3.

If this level is not suitable for your area the softener should be adjusted.

You may change the factory level setting by means of the wash programme selector

push buttons. Each button corresponds to a different level.

Level 1 = "RINSE & HOLD"

Level 2 = "INTENSIVE 70°"

Level 3 = "NORMAL 65°"

Level 4 = "BIO 50°"

Level 5 = "QUICK 50°"

push button