AEG VA6011LT Instructions pour l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} AEG VA6011LT. AEG VA6011LT 48 pages.

4. Fill with rinse aid exactly up to the

level marked "max"; this corresponds

to a quantity of approx. 140 ml.

5. Close the lid and press until it locks

into place.

6. Wipe up any spilt rinse aid with a

cloth. Otherwise too much foam will

be formed during the wash.

Adjusting Rinse Aid Dosing

As the dishes are washed rinse aid is released from the dispenser into

the wash water. The dose is factory set at 4, and can be adjusted from

1 to 6. Only change the setting if streaks, milky spots or dried on water

marks are visible on glasses or crockery.

1. Open the door of the dishwasher.

2. Press the rinse aid compartment

release button with your finger.

3. Fully open the rinse aid compartment

lid.

4. Set the dose level.

5. Close the lid and press until it locks

into place.

6. If rinse aid has run out, wipe up with

a cloth.

Operating Instructions