AEG 21602 G Manuel d'utilisation et d'installation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} AEG 21602 G. AEG 21602 G 26 pages. Gas hob
Également pour AEG 21602 G : Instructions d'utilisation et d'installation (27 pages)

Imprimer la page

1. Description of the Hob
2. Engineer Technical Data
3. Cut out Size

Permanent Connection

In the case of a permanent connection, it is necessary that you install

a double pole switch between the hob and the electricity supply

(mains), with a minimum gap of 3 mm. between the switch contacts

and of a type suitable for the required load in compliance with the

current electric regulations.

The switch must not break the yellow and green earth cable at any

point.

Ensure that the hob supply cord does not come into contact with

surfaces with temperatures higher than 50 deg. C.

Wiring diagram

A. IGNITOR SWITCH

B. IGNITOR UNIT

220/240