AEG 21602GM Instructions d'utilisation et d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG 21602GM. AEG 21602GM 27 pages.

Fitting the hob to the worktop

Before fitting the hob into the cut out,

a sealing gasket supplied with the

hob must be fitted to the edge of the

cut out. It is essential that no gaps

are left in this seal in order to prevent

spillage near the hob seeping into the

cabinet below.

1) Place the sealing gasket

all around the edge of the

cut out.

2) Place the hob into the cut

out and secure it by

means of the relevant

fixing clamps and screws,

as shown in the diagram.

3) Remove the excess seal

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO0199

Seal