AEG 3000 IKB64301XB Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG 3000 IKB64301XB. AEG 3000 IKB64301XB 20 pages.

• Disconnect the appliance from the mains

supply.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

3.3 Connection cable

• For a single phase or two phase

connection, use the cable type: H03V2V2-

F or H05BB-F which withstands a

temperature of 90 °C or higher.

• To replace the damaged mains cable, use

the cable: H03V2V2-F or H05BB-F which

withstands a temperature of 90 °C or

higher. Contact an Authorised Service

Centre. The connection cable may only be

replaced by a qualified electrician.

3.4 Assembly

If you install the hob under a hood, please

see the installation instructions of the hood

for the minimum distance between the

appliances.

• Cut off the mains electrical cable close to

the appliance and dispose of it.

min.

500mm

If the appliance is installed above a drawer,

the hob ventilation can warm up the items

stored in the drawer during the cooking

process.

Combination with standard oven

min.

50mm

ENGLISH