Brother MFC-J6510DW Manuel d'installation rapide - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-J6510DW. Brother MFC-J6510DW 39 pages. Quick setup guide - spanish
Également pour Brother MFC-J6510DW : Spécifications (2 pages), Manuel d'installation rapide (41 pages), Manuel d'instructions (17 pages), (anglais) Quick Configuration Guide (41 pages)
Imprimer la page
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press Clear.
Press
One
key
time
2
A
3
D
4
G
5
J
6
M
7
P
8
T
9
W
f
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
13
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User's
Guide.
Set Tone or Pulse dialling
14
mode (Not available in
New Zealand)
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Menu.
10
Two
Three
Four
times
times
times
B
C
2
E
F
3
H
I
4
K
L
5
N
O
6
Q
R
S
U
V
8
X
Y
Z
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
d
Press d or c to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
15
Five
times
A
D
If you are connecting the machine to a VoIP service
G
(over the Internet) we recommend that you change
the modem speed to minimize errors in fax
J
operations.
M
7
Note
T
If you are using an analogue telephone line you
9
can skip this step.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Compatibility.
d
Press d or c to choose Basic(for VoIP).
Press OK.
e
Press Stop/Exit.
16
You can load special print media into this slot. (Please
note that only one sheet can be used at a time.) Use
the manual feed slot to print or copy on envelopes,
labels or thicker paper.
For details, see Loading paper in the manual feed slot
in chapter 2 of the Basic User's Guide.
Set the telephone line
compatibility