AEG 34942G Instructions d'utilisation et d'installation - Page 20

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG 34942G. AEG 34942G 26 pages. Gas hobs
Également pour AEG 34942G : Manuel d'utilisation et d'installation (26 pages), Instructions d'utilisation et d'installation (26 pages), Instructions d'utilisation et d'installation (26 pages), Instructions d'utilisation et d'installation (27 pages)

Electrical connections

Any electrical work required to install this hob should be carried out

by a qualified electrician or competent person, in accordance with the

current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be

observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical

supply.

Before switching on, make sure the electricity supply voltage is the same as

that indicated on the hob rating plate. The rating plate is located on the

bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp

plug fitted. In the event of having to change the fuse, a 3amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be replaced for

any reason, the wires in the mains lead

are coloured in accordance with the

following code:

Green and Yellow - Earth

Blue

Brown

1) Connect the green and yellow

(earth) wire to the terminal in the plug which is marked with the

letter 'E' or the earth symbol

2) Connect the blue (neutral) wire to the terminal in the plug which is

marked with the letter 'N' or coloured black.

3) Connect the brown (live) wire to the terminal in the plug which is

marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and

the cord clamp must be secure over the outer sheath.

In the event of having to change the fuse, a 3amp ASTA approved (BS 1362)

fuse must be used.

A cut off plug inserted into a 13 amp socket is a serious safety

(shock) hazard. Ensure that the cut off plug is disposed of safely.

- Neutral

- Live

FO 0390

or coloured green and yellow.