Brother MFC-J6955DW Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-J6955DW. Brother MFC-J6955DW 2 pages.
Également pour Brother MFC-J6955DW : Manuel de sécurité des produits (23 pages), Manuel d'installation rapide (2 pages), Manuel de sécurité des produits (23 pages)
Imprimer la page
9
Machine settings
Follow the LCD instructions to configure the machine settings.
• Configure the tray settings and check the paper orientation information (not
available on all models).
• Check the software installation information.
Connect the telephone line cord
11
If you are not using your machine as a fax, go to
(For Europe) We can send you a genuine Brother cord free of charge if you need one. To contact us, visit www.brother.eu.
Lift the scanner cover.
Connect your computer or mobile device to your machine
12
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit
setup.brother.com
to download and install
Brother software.
setup.brother.com
Can't Connect? Check the following:
Wireless network
Wired network
USB connection
Manual wireless setup
13
If the wireless setup is not successful, try to set up the connection manually.
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router
and write them in the table provided below.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXXX
Network Key: XXXX
If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.
. For more information on using the fax feature, see the Online User's Guide.
12
(Example for UK)
Connect the telephone line cord. Use the socket
marked LINE and guide the cord out the back of the
machine.
Follow the on-screen instructions and prompts.
NOTE
For Wired Network Connection and USB Connection,
locate the correct port (based on the cable you are using)
inside the machine as shown.
Restart your wireless access point/
router (if possible).
Disconnect the cable.
Go to your machine,
and press
[Find Wi-Fi Network] >
[Yes].
10
Select your language (if needed)
1. Press
[Settings] > [All Settings] > [Initial Setup]
> [Local Language].
2. Press your language.
3. Press
.
Restart your machine and
12
computer, and then go to
Select the SSID (Network
>
Name) for your access point/
router and enter the Network Key
(Password).
When the wireless setup is
successful, the LCD displays
[Connected].
If setup is not successful, restart
your Brother machine and your
wireless access point/router, and
13
repeat
.
Close the scanner cover.
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine's
settings is located on the back of the machine
and marked "Pwd". We recommend immediately
changing the default password to protect your
machine from unauthorised access.
If still not successful, go to
.
If still not successful, visit
for FAQs and Troubleshooting.
Go to
© 2021 Brother Industries, Ltd. All rights reserved.
D01YPH001-00
13
.
support.brother.com
to install software.
12